[–] frenemy 0 points 1 point 1 point (+1|-0) ago
first read the manual for your motherboard so you know where to plug everything in. were you using it before without issues? if it worked before, your boot drive is probably dead. that's the only reason it would just stop showing up in bios. the sata ports are all on by default usually. unless you've been turning things off in bios. the best steps for troubleshooting are probably:
if it won't see a new drive with a new cable and you reset the bios already your talking about a motherboard issue.
[–] tury 0 points 2 points 2 points (+2|-0) ago
Hard drive not recognized. Check port. Make sure bios sees hard drive.
[–] AnotherRetard [S] ago
Does it matter what sata port I plug it into? That .45 is looking really chewable
[–] tury 0 points 4 points 4 points (+4|-0) ago
Yes. Certain SATA ports are likely disabled. The ports are probably colored differently. They can either be enabled in BIOS by changing settings, OR, just unplug any other hard drives you have, and just get it working with the single hard drive that has Windows on it. Try a different colored port. Keep trying until it finds it.
Often certain SATA porta are disabled.
If that doesn't work, to through the BIOS settings for SATA. You should be able to see the hard drive.